Re: Telemax RGB Color board

["Ferdinan Meyer-hermann" <ferdinan.meyer-hermann@a2central.com.remove-bv-this>]

  To: heuser.marcus
heuser.marcus wrote:

> On Aug 3, 12:07 am, Steven Hirsch <snhir...@gmail.com> wrote:
>>
>> The board has three individual wires with mini-clips
>> on the end
> [snip]
>>
>> GR  --> Grey Lead
> 
> Could be the connection to "Ground" on the motherboard.
I don't think so, that wouldn't make sense, because Ground is present on the
slots. I think it is a connection to the GRAPHICS TIME signal, which is
often just labeled GR. It is present on pin 58 of the AUX slot.
> 
>> 14M --> Green Lead
> 
> Probably a connection to the 14 MHz signal.
Yes. It is available on pin 32 of the AUX slot.
> 
>> Ae  --> Blue Lead
>> A+  --> n/c
>>
>> Clearly this is configured for a IIe.
> 
> And the blue lead is probably connected to some other
> signal on a IIe motherboard.
It might be the video signal. You can find that on pin 28 of the AUX slot.
> 
>> Now, I just need to find out what it requires for
>> software and monitor and where those clips attach.
> 
I suspect that you won't need any software, but you'll need the monitor. If
you have a scope I could tell you how to figure out, how it is connected.
If you have some RGB monitors with a correct plug, you could try them.

Regards,
Ferdinand Meyer-Hermann