[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RAMFast D problems

Subject: Re: RAMFast D problems
From: "Bill Garber" <willy46pa@comcast.net>
Date: Sat, 28 Jun 2008 14:00:39 -0400
Newsgroups: comp.sys.apple2
References: <xYydnQ-oU-GjGsPVnZ2dnUVZ_vjinZ2d@comcast.com> <kvbb64liqn7rh8m4klbll7u9chr5fd4e70@4ax.com> <RfOdndLRsqMaTfjVnZ2dnUVZ_hqdnZ2d@comcast.com> <6ebd26f0-9767-44b4-b959-46b4e29f1e59@x35g2000hsb.googlegroups.com> <UoWdneuGBZJUu_vVnZ2dnUVZ_vCdnZ2d@comcast.com> <17e87ca5-b7a1-4403-8daa-8585495cf00d@j33g2000pri.googlegroups.com>
Reply-to: "Bill Garber" <willy46pa@comcast.net>
Xref: g2news1.google.com comp.sys.apple2:1294

<aiiadict@gmail.com> wrote in message 
17e87ca5-b7a1-4403-8daa-8585495cf00d@j33g2000pri.googlegroups.com">news:17e87ca5-b7a1-4403-8daa-8585495cf00d@j33g2000pri.googlegroups.com...
On Jun 28, 4:56 am, "Bill Garber" <willy4...@comcast.net> wrote:
> > Aren't the Apple SCSI card's cables firmly attached?
> 
> I have a non high-speed apple SCSI card here, and the
> cable does not disconnect..  it is permanently attached
> to the board.


Thanks. That's what I believed, and I'm sure the High Speed 
SCSI card has it attached, as well. I don't have one to look at. 

Bill Garber from GS-Electronics
http://www.garberstreet.com

References:
- RAMFast D problems
  - From: Rich <nospam@saddam.net>
- Re: RAMFast D problems
  - From: Mitchell Spector <mitch2gs@hotmail.com>
- Re: RAMFast D problems
  - From: "Bill Garber" <willy46pa@comcast.net>
- Re: RAMFast D problems
  - From: schmidtd <schmidtd@my-deja.com>
- Re: RAMFast D problems
  - From: "Bill Garber" <willy46pa@comcast.net>
- Re: RAMFast D problems
  - From: aiiadict@gmail.com

Prev by Date: Re: RAMFast D problems
Next by Date: new toy
Previous by thread: Re: RAMFast D problems
Next by thread: Re: RAMFast D problems
Index(es):
- Date
- Thread