[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Monitor problem

Subject: Re: Monitor problem
From: Giorgio Morocutti <giorgio.morocutti@alice.it>
Date: Thu, 31 Jan 2008 18:14:25 +0100
Newsgroups: comp.sys.apple2
Organization: TIN.IT (http://www.tin.it)
References: <sje1q3dvc722gf3l9m61s4g9t7d4pvl5na@4ax.com> <28ednTglL7ZgnjzanZ2dnUVZ_vrinZ2d@comcast.com> <0qn2q39d24m9q22rmeg9k5g0dte4qgqt6k@4ax.com> <V_udna93wKCxDzzanZ2dnUVZ_v6rnZ2d@comcast.com>
Xref: g2news1.google.com comp.sys.apple2:32326

On Thu, 31 Jan 2008 01:16:32 -0800, "Michael J. Mahon"
<mjmahon@aol.com> wrote:

>This is the result of the CRT not remaining biased off after
>power is turned off.
>
>I'd look for an open capacitor or resistor in the vicinity
>of the grid and/or cathode bias circuits.  (I haven't found
>the schematic yet.)

Can I send you in .jpg format via email ?
(circa 900kB)

Thanks

Giorgio


Giorgio Morocutti
giorgio.morocutti@alice.it
Apple II & Apple III forever !

Follow-Ups:
- Re: Monitor problem
  - From: "Michael J. Mahon" <mjmahon@aol.com>

References:
- Monitor problem
  - From: Giorgio Morocutti <giorgio.morocutti@alice.it>
- Re: Monitor problem
  - From: "Michael J. Mahon" <mjmahon@aol.com>
- Re: Monitor problem
  - From: Giorgio Morocutti <giorgio.morocutti@alice.it>
- Re: Monitor problem
  - From: "Michael J. Mahon" <mjmahon@aol.com>

Prev by Date: Re: what apple is this?
Next by Date: Power Supplies
Previous by thread: Re: Monitor problem
Next by thread: Re: Monitor problem
Index(es):
- Date
- Thread