To: Greg Buchner Greg Buchner wrote:
In article <1189282647.424287.78210@y42g2000hsy.googlegroups.com>, schmidtd <schmidtd@my-deja.com> wrote:On Sep 8, 3:54 pm, "BluPhoenyx" <bluphoe...@a2central.com.remove-v89- this> wrote:Does someone know what the GS error 0910 is? I have a rom 3 board which gives this error on power up.According to the FAQ: http://home.swbell.net/rubywand/Csa2ERRLIST.html#002 0910 APPLE DESKTOP BUS: command not completedI think I used to get that error on my GS when the solder holding the ADB socket onto the keyboard board would finally give up the ghost. I had to unscrew the keyboard and touch a soldering iron to the connectors and things would then work good again.But I don't remember for certain if that's the same error I would get. It's been too long since it's last happened.Greg B.
Thanks, guys. I'll put it in my pile of hardware to check later. Cheers, Mike T --- Synchronet 3.14a-Win32 NewsLink 1.85 A2Central.com - Your total source for Apple II computing.