Re: Laser3000 and Mountain card Multifunction

[Roger Johnstone <roger@roger.geek.nz.removethisbit>]

In <kmf5731ocui0qi6v3mgm224uq41la4732i@4ax.com> Giorgio Morocutti  wrote:
> Good morning folks !
> 
> I have 2 questions for you:
> 
> 1- I have one Laser 3000 -  Apple II clone, but no manuals or
> schematics. I am looking at least for connection on rear of the case.

I can probably help with the first question, as I have a set of manuals 
for the Laser 3000 (sold here as the Dick Smith Cat, but identical 
except for the name). These are the User's, DOS, BASIC Reference, and 
Technical Reference manuals.

Which connection are you after? The 72-way system bus on the back (
normally used for the disk drive controller cartridge) is the same as 
the emulation cartridge slot on the side and the internal expansion 
header. Most of the signals are the same as an Apple Bus slot, with a 
few extra to handle the extra memory and graphics modes. Let me know 
what you want and I'll scan it in and post it on my web site.

-- 
* Roger Johnstone, Invercargill, New Zealand -> http://roger.geek.nz
* PS/2 Mouse Adapter for vintage Apple II or Mac
* SCART RGB video cable for Apple IIGS