Re: ADTPro 0.1.5 IIGS WinXP problem

["schmidtd" <schmidtd@my-deja.com>]

On Mar 25, 7:40 pm, Mark McDougall <msmcd...@no.spam.iinet> wrote:
> With this configuration I can boot 5.25" DOS3.3 and Lode Runner, for
> example.

> I can start a transfer of EsDOS II without any problems, but somewhere
> between 1/3 and 1/2 way thru the transfer, the IIGS screen stops scrolling.
> The ADTPro server continues sending until the transfer completes. Not
> surprisingly, no prompt on the IIGS screen either.

> Ultimately I'm trying to get a 3.25" bootable DOS (ProDOS?) and also
> GSOS v5 onto 3.25" floppies.

It doesn't sound like the IIgs is keeping up, which is kind of strange
- at 2.8-ish times the speed of the original II, it doesn't usually
have that problem at 300 baud.

But before we solve that one, though... don't you already have DOS
3.3?  Above, you say you have 5.25" DOS 3.3.  You should be able to
use that as a basis to format a new floppy and send over the DOS ADT
bits, with which you can send the ADTPro floppy (see:
file:///C:/src/workspace/311/adtpro/doc/target/site/bootstrap.html#If%20you%20already%20have%20DOS%203.3,%20but%20no%20ProDOS).

What are you starting your IIgs with when you are attempting your
ADTPro bootstrapping operations?  DOS or ProDOS?