Re: Getting FUD "into" a DOS Master Volume

["Senor Wences" <burker.josh05@gmail.com>]

Thanks Rich and Guillaume.

I ended up downloading Copy II+ v7.2 (all of the 7.1 archives I have
found are corrupt and will not expand).  I was able to use Copy II+
7.2 to format a floppy as a DOS 3.3 volume and copy FUD and FUD.S from
a ProDOS CF partition to the floppy.  After booting to ProDOS on the
CFFA, I was able to run DOS Master and boot to DOS on the CFFA, then
use FID to copy FUD to the CF (that sounds funny, doesn't it?).

All the versions of Copy II+ that I had from the early 1980s were too
old to touch a ProDOS volume.

On Mar 18, 4:37 am, "Guillaume Tello" <houten....@wanadoo.fr> wrote:
> "Rich Dreher" <r...@dreher.net> a écrit dans le message de news:
> MPG.20667e78c64ada0d989...@news.octanews.com...
>
> >I haven't tried it recently, but you should be able to copy FUD to any
> > scratch DOS3.3 floppy from prodos using Copy II+ or similar and then
> > boot into DOS master, and then BLOAD FUD from the floppy and then BSAVE
> > it back to any DOS.MASTER volume.
>
>     Best is to BRUN FUD from the floppy and to use it to copy itself. Then
> its length is useless.
>
>     Guillaume.