Re: Uthercard Mac address

[spectrumdaddy@nospam.com (Ewen)]

AMart79196@gmail.com <AMart79196@gmail.com> wrote:

> I will do some testing to see it its static or dynamic.
> I am trying to use Spectrum and everything is just not workig out for
> me...first it was my GS not connecting to the network, then it was my
> spectrum disk, so, now I need to get another spectrum and to test to
> see if its static or dynamiclly set for each session by the contiki
> software....just my luck..

Spectrum is a 16 bit application, and Contiki is an 8 bit system. The
two do not mix, and Contiki has not effect on Spectrum. It is the
Marinetti Link Layer for the Uthernet card that controls access with
Spectrum.

If you are using Spectrum with the Uthernet card, then you need the
Uthernet Link Layer for Marinetti. You can get that from
<http://www.a2retrosystems.com/>.

The current version of Spectrum is 2.5.3. Spectrum is still a commercial
product, and so if you need another copy, you need to go to the only
official distributor, Syndicomm <https://store.syndicomm.com/>.

Ewen