Re: Need help with an Accellerator IIe Card

["PZ" <skierpaul@yahoo.com>]

KPR wrote:
> Will do..  there weren't main chips that need to be reseated they're
> all pretty good, not much ocidation on the chip pins but the edge
> connector does need a good cleaning..
>
> I will try the card myseld at home.. its been out of a machine for a
> year so who knows..
>
> It was working when it was pulled however..  probably needs some chips
> replaced due to static of it laying around..
>
> Anyone know which 74LS chips were more suseptable to static..
>
> The card has : 23 - 74LSXXX
>                        8 - 4264 ( ram )
>                        2 - 4416 ( ram )
>                        1 - 6309-1J -- not shure what this is
>                        2 - 65C02 ( Well on and probably a 3.5 mhz model
> under a sticker )

You can get 4264's out of a spare //e.  They're 64k x 1 chips.  Most of
the older 64k/80 column cards used these as well.  I'd start here since
DRAM is a lot more likely to go bad than most anything else, just due
to the sheer number of transistors they contain vs any other IC on the
board.

- Paul