[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ATX -> Apple2e powersupply adaption.

Subject: Re: ATX -> Apple2e powersupply adaption.
From: "Vince Briel" <vbriel@removethisspamcamcast.net>
Date: Fri, 9 Jun 2006 07:15:40 -0400
Newsgroups: comp.sys.apple2
References: <1149842313.694848.231540@g10g2000cwb.googlegroups.com> <1149848906.454781.260470@h76g2000cwa.googlegroups.com>
Xref: g2news2.google.com comp.sys.apple2:9032

The 7905 and a 10lb heat sink. That's a big drop! I did the positive side 
12V to 5V and it produces a lot of heat. You drop it that much and you 
better find a Pentium 2 heat sink :)

Vince

-- 
Making computers fun again
See the new AltairPC
http://www.brielcomputers.com

"David Wilson" <mcs6502@gmail.com> wrote in message 
1149848906.454781.260470@h76g2000cwa.googlegroups.com">news:1149848906.454781.260470@h76g2000cwa.googlegroups.com...
>> So, big question, how do I make the -12 to -5v regulator?
>
> You buy a 7905 three terminal -5V regulator. That plus a couple of
> capacitors (one on the input and one on the output) will do the trick.
>

References:
- ATX -> Apple2e powersupply adaption.
  - From: "General_Failure" <tristan.mumford@gmail.com>
- Re: ATX -> Apple2e powersupply adaption.
  - From: "David Wilson" <mcs6502@gmail.com>

Prev by Date: Re: ATX -> Apple2e powersupply adaption.
Next by Date: Re: interesting link
Previous by thread: Re: ATX -> Apple2e powersupply adaption.
Next by thread: Re: ATX -> Apple2e powersupply adaption.
Index(es):
- Date
- Thread