Re: Question about transfering image file from PC to Apple IIe using ADT

[mores_p@hotmail.com]

David4602@gmail.com wrote:
> Oops, sorry - the second reference should be
> http://home.swbell.net/rubywand/Csa2T1TCOM.html, FAQ 003, "From:
> Delfs", not FAQ 033.

Hi! Thanks for dos 3.3. link it's very helpful.

However, the above mentioned FAQ
(http://home.swbell.net/rubywand/Csa2T1TCOM.html) is what i looked at
before. They told me that i could get by with straight-through cable
when i set the jumper block to "terminal" which is what i currently do.

But they never tell what the dip switch setting to match "terminal" is.
They mentioned dip switch setting for "modem" which is
1001111 - 1101110
       ^^^^
According to FAQ013, this setting (111) is "modem operation". But my
understanding is that i am operating under "printer operation" (011)
when i set jumper block to "terminal". So i am not sure if i should
change it to
1001011 - 1101110

If you know the answer, please tell me.

Thank you
Mark