Re: Good VTxxx emulator for non-enhanced //e?

[Gadi Friedman <gadi1@earthlink.net>]

The only AppleII Vt100 emulation woth anything was a commercial
package called Softerm II.

I don't know where you would get that nowadays.

Gadi


> Jay Maynard wrote:
> My roommate has a //e without the enhancement kit, but with two disks and a
> Super Serial Card. I need a *good* VTxxx (preferably VT220, but VT100, or in
> a pinch VT52 will do) terminal emulator for this box. zlink appears to want
> the enhanced //e (it runs fine on Virtual II with the 65C02 enabled, but
> dies horribly with a straight 6502, as it does on the real machine).
> Kermit's VT100 isn't good enough; the device I'm connecting to sends an
> escape sequence (clear screen, probably) that puts it into 40-column mode,
> and things are horribly broken from that point on. It should run at 9600
> baud, and can use XON/XOFF or hardware flow control if necessary. I'd rather
> not pay for ProTerm unless there's no other option.
>
> What should I grab? If it's available on the net, where can I get it? I do
> have ADT running, so getting stuff to the real machine is no problem.