[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Integer + Applesoft BASIC ROMs



So, I would not need six switches, but a one single pole, double throw
switch.  What I would do then is to bend up the A12 pin of each 4KB
EPROM and solder a wire from each to the central pole of the switch.
One end pole would be attached to +5v and the other end pole to ground.
 When the switch is in the +5v position, all six address pins will be
active and the upper half of each 4KB will be active.  When the switch
is in the ground position, then only the lower half of each 4KB will be
half.