Re: Apple II Interger ROMs

[Paul Schlyter <pausch@NOSPAMsaaf.se>]

In article <Paewe.1411$cb6.1179@newssvr30.news.prodigy.com>, 
nospam@nospam.com says...
>Hello,
>
>    DOS 3.3 Master does not have original Integer BASIC as ROM because it 
>had a very small modification.  I suggest that you can download from 
>asimov.net which it has original Integer BASIC ROM.

That small modification ought to be a bugfix..... why would you not want 
that?  Or it's berpahs the Autostart Monitor ROM instead of the original
Monitor ROM - again why would you not want that?

>Do not forget to start at $D000 through $FFFF which it should be 12,288
>bytes before it can be divided into 2,048 bytes.

Actually, Integer Basic only resides from $E000 to $F7FF and the upper part
of that range is used by the ROM-based mini-assembler.  $F800-$FFFF is the
Monitor of course.  And $D000-$DFFF is used by other stuff: the Sweet-16
interpreter, the floating-point routines (which are NOT used by Integer
Basic - they're useable only from assembler), and the Programmer's AID #1
stuff (which includes a 6502 machine code relocator).

>Then, you can burn them into EPROM chips.
>
>Bryan Parkoff
>
>"Lyrical Nanoha" <LyricalNanoha@dosius.net> wrote in message 
>Pine.LNX.4.62.0506280422430.22015@static-141-149-129-16.buff.east.verizon.net">news:Pine.LNX.4.62.0506280422430.22015@static-141-149-129-16.buff.east.verizon.net...
>> On Tue, 28 Jun 2005, Cookie Lu wrote:
>>
>>> Hi,
>>>
>>> Is there anywhere I can download the Apple II Interger Roms so I can 
>>> burned
>>> it into the eeproms?
>>>
>>> Cookie
>>
>> If you have the Apple ][ DOS 3.3 system master of 8/25/80, the file 
>> INTBASIC is the Apple ][ ROM.
>>
>> -uso. 
>
>
>

-- 
Paul Schlyter,  Grev Turegatan 40,  SE-114 38 Stockholm,  SWEDEN
e-mail:  pausch at saaf dot se
WWW:     http://stjarnhimlen.se/