[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: What type of slot interface in is the Apple II using?

Subject: Re: What type of slot interface in is the Apple II using?
From: "Robert C." <robc638killspam@sympatico.ca>
Date: Thu, 14 Apr 2005 20:52:12 -0400
Newsgroups: comp.sys.apple2
Organization: Bell Sympatico
References: <1113278162.279159.33380@g14g2000cwa.googlegroups.com> <hulm5159c6jbp9otacvfmlqg1vuinaish7@4ax.com>
Xref: g2news1.google.com comp.sys.apple2:10343

>    These slots are called "Apple II Bus". Physically it is the same type 
> of
> slot connector as ISA, though 50-pins double-sided rather than 62-pins
> (obviously the signal to each pin differ, it's not ISA compatible).

Anyone know where I can get prototype boards that are already 2 X 25 X .100" 
in length? I remember that Radio Shack used to carry prototyping boards in 
the 1980's, but checking their website reveals that these are no longer 
carried.

~Robert.

Follow-Ups:
- Re: What type of slot interface in is the Apple II using?
  - From: "Robert C." <robc638killspam@sympatico.ca>

References:
- What type of slot interface in is the Apple II using?
  - From: "Alex Ngai" <alex.theprogrammer@gmail.com>
- Re: What type of slot interface in is the Apple II using?
  - From: Mitchell Spector <mitch2gs@hotmail.com>

Prev by Date: Re: OT...but perhaps of interest
Next by Date: Re: OT...but perhaps of interest
Previous by thread: Re: What type of slot interface in is the Apple II using?
Next by thread: Re: What type of slot interface in is the Apple II using?
Index(es):
- Date
- Thread