Re: GBBS Pro with null modem

["Bill Garber" <willy46pa@comcast.net>]

"Forty Two" <FourtyTwo@NoAddress.invalid> wrote in message
news:1109432983.08f56c60d689cd92bdf149351ab2fa69@1usenet...
:
: Has anybody had any luck communicating from a PC using HyperTerminal
: and GBBS Pro running on an Apple IIe?
:
: I have successfully called it using a 1200 baud modem (boy, did that
: seem slow). I have successfully transferred files between the two
: systems using ASCII Express and the HyperTerminal, so I am pretty sure
: my connection is OK.
:
: I am using a SuperSerial card in slot 2. I have tried about every
: modem on the GBBS Pro setup screen, but it will not go on-line with
: the null modem (i.e. it doesn't display the twirling indicator in the
: upper right corner of the screen, and it won't respond to keystrokes).
:
: Like I said, it works OK with an actual modem attached, and also works
: OK if I specify 'no modem'.
:
: If anybody has any advice, I would appreciate it very much.

No problem. Flip the "Modem/Terminal" jumper block over
to the other setting on your Super Serial Card.

Apple II Forever, Apple II Together
Bill @ GarberStreet Enterprizez
Web Site - http://garberstreet.netfirms.com
HOME OF THE RAM-4-GS
Email - willy46pa@comcast.net