Re: AppleIIGS error

["bw" <bwegher@hotmail.com>]

"Giorgio Morocutti" <gmoroc@libero.it> wrote in message 
unn801p1mmmmidtgrlu3ais6tuv88ngf58@4ax.com">news:unn801p1mmmmidtgrlu3ais6tuv88ngf58@4ax.com...
> Hallo people
> my IIGS tells to me:
> " System bad 02E02000"
> By this error message can you understand where is the hardware failure
> ?

Remove any boards found in slots.
Hold down the two keys to the left of the space bar, switch power ON.
Allow POST (power on self test) to complete.
If successful, the bottom of screen will say "Successful test" or something 
like that.
Check voltage of the battery with a good voltmeter, anything less than 3 
volts means that it should be replaced.
Replace boards one at a time, with POST each time.