Re: IIe --> ][+ paddle conversion

["GarberStreet" <willy46pa@comcast.net>]

Simon Williams <email@DELETE_THIS.luddite.no-ip.com> wrote in message
news:1gq7xpb.11u92d96ukswiN%email@DELETE_THIS.luddite.no-ip.com...
> Wayne Stewart <waynes@telus.dotnet> wrote:
>
> > Simon Williams wrote:
> > > Is it possible that paddles/joysticks for the IIe could be used with a
> > > ][+ by wiring the db9 plug to the socket on the board?
> > > If so, anyone have a pinout handy?
> >
> > They used to sell adapters for that at one time. Basically a male 16
> > pin with about a foot of cable and a female db9 at the end. You should
> > be able to just compare the pinouts of the two connectors and work it
> > out. If you don't have the pinouts of those, I can dig out an adapter
> > and get the pinout.
> >
> > Wayne
>
> Thanks, I've found the pinout for the schematic
> for the 16-pin version, so I _should_ be able to
> figure it out from there (presumably there are
> no other differences between the two models).

Plenty of other differences, but none where the
paddles are concerned. Just the pinout.  :o)

Apple II Forever, and Apple II Together,
Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy46pa@comcast.net