[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GS hard drive to image file?
- Subject: Re: GS hard drive to image file?
- From: Jeff Blakeney <CUTjblakeney@sympatico.ca>
- Date: Tue, 28 Dec 2004 18:03:11 -0500
- Newsgroups: comp.sys.apple2
- Organization: Bell Sympatico
- References: <41ce876e$0$47104$c3e8da3@news.astraweb.com> <ktGzd.14578$_3.164698@typhoon.sonic.net> <41cfa34b$0$39344$c3e8da3@news.astraweb.com>
- Xref: g2news1.google.com comp.sys.apple2:6532
On Mon, 27 Dec 2004 00:50:25 -0500, "Brian Peek" <peekb@nycap.rr.com>
wrote:
>Thanks so much for the information! My drive is a standard, external SCSI
>Apple 40MB drive, but I'm unsure of the model. I do have a SCSI interface
>setup on my PC and will try that route first.
I just did this recently with the 540MB hard drive I have on my IIgs.
It isn't about to die or anything, I just wanted to have the same
software and data available in KEGS as I have on my real IIgs. :-)
I have a SCSI card in my PC so I just hooked up my IIgs' hard drive to
my PC and ran CiderPress and made disk images out of the partitions.
And an aside to Andy, I will be registering CiderPress once I get my
Christmas bills taken care of. :-)
--
Jeff Blakeney - Dean of the Apple II University in the
Apple II Community on Syndicomm.com
CUT the obvious from my address if you want to e-mail me