Re: Need help hooking up old SCSI drives

[Wayne Stewart <waynes@telus.dotnet>]

As Greg said, the Atlas II would need an adapter to work with a IIgs.
I don't know which Seagate drive and which SCSI card you have and that
might be of inportance as some incompatibilities do exist.

For the Seagate

For SCSI ID you can use jumpers or if they'll fit the pins you can
use the connectors in pic 0891. In either case the SCSI id pins are
the three right hand sets in Img_0986. If this is your only drive
then SCSI id 6 is your best setting. To get SCDI id 6 jumper the
second and third from right in Img_0986.

As Greg mentioned, it's usually more convenient to have to have an
external SCSI terminator. If you're going to do that you should pull
the   termination jumper. It's located on a srip of pins on the bottom
of this Seagate drine and should have the letters te beside it.

Wayne