Re: RAM Errors

[mjmahon@aol.com (Michael J. Mahon)]

MechCD wrote:

>It did the same with the PC power supply. I didn't get a chance to hook up
>the -5v and -12v lines. I honestly don't know whats going on because the
>"good" board was acting goofy too. Probably the negative power lines.
>
>Where cna I get another PSU for the IIe?

If it didn't work with a PC power supply, then it's unlikely to
work with another //e power supply.  ;-)

Sounds like you have a problem on the board.

You will need to get a good configuration--good board and
good power supply--working again, so you have known-good
subsystems to swap.

It is unlikely, but not impossible, that the power supply failed
in a way that can damage the main board, so that cannot be
ruled out yet.

-michael

Check out parallel computing for 8-bit Apples on my
Home page:  http://members.aol.com/MJMahon/