Re: need help with apple MIDI audio hardware/software

[bill_gates@microsoft.com (Simon Williams)]

Erik Swedberg <swedbird@gmail.com> wrote:

> you're suggesting just taking one of those signals, using adaptors
> (say from radio shack?) to go from the RCA connector to a 1/4" cable
> (like a guitar cable)? would it be ok to run that signal into a mixing
> board? would there be any weird impedance or signal strength issues?

I use a 1/8" stereo to 2xRCA(M) adaptor with an RCA(F) to 1/4" Mono
adaptor stuck on one of the RCAs. I plug this right into my mixer with
no problems at all. Only problem is that most of the cables you get at
Radio Shack are pretty thin and won't necessarily hold up to the rigours
of stage use.

-- 
._____. SIMON WILLIAMS  *email*at*luddite*dot*ca*
|[LD8]! LUDDITE APPAREL http://apparel.luddite.ca
| (O) | FAILURE RECORDS http://failure.luddite.ca
!__!__! LC475 WEBSERVER http://luddite.no-ip.com