Re: RamFAST and Vulcan: Can GS/OS see them both?

[Wayne Stewart <waynes@telus.dotnet>]

Tim Haynes wrote:
> Hi everyone,
>
> I have done a limited amount of experimenting to see if I can get my Rom03
> to see both my Vulcan HD and RamFAST scsi drives at the same time.  I
> haven't done much except boot from SCSI and see if the Vulcan is there
> (nope) and to boot from the Vulcan and see if the SCSI drives are there
> (nope).  Come to think of it, I should install the SCSI extensions onto the
> GS/OS on the Vulcan, eh?
>
> Anyway, does anybody have a similar rig that they can confirm works, before
> I spend days on this only to see that it is actually impossible?

There's probably other setups that work but here's the one that I used
to move files over to my Vulcan. Actually it's the only one I tried.

Slot 7 - Vulcan
Slot 2 Ramfast

Set to boot from slot 2

If you have a large amount of partitions you might need to use the
Ramfast utilities to make sure the ramfast isn't trying to put any
of it's own partitions in slot 7.

Wayne