Re: ADT, Prodos Masters, etc ...

["John Van Winkle" <appleiieman@charter.net>]

I have my Apple IIe hooked to my PII using just a "modem cable" like the one
cyberguys has because that is where I bought it.  The SSC jumper block
arrow/triangle needs to point down, then you can use ADT and it will work.
If it points up, you will have to use a null modem cable.


John Van Winkle



"Ed Eastman" <noone@nowhere.net> wrote in message
news:cd5pmo$p7r$1@unlnews.unl.edu...
> Confirmed, yes it will function as needed at speed wit a SSC set to
printer.
>
> Thankx,
> Ed
>
> Rubywand wrote:
> Sounds like it should work if your SSC's Jumper Block is set for
> "Printer". (See http://home.swbell.net/rubywand/Csa2T1TCOM.html#013 .)
> The 25M side would go to the SSC and the 9F side would plug into a PC
> 9-pin COM port socket.
> Perhaps someone here has tried using such a cable to connect a //e to a
> PC and can say for sure.
>