[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Little Mouse
- Subject: Re: Little Mouse
- From: "Bill Garber" <willy46pa@comcast DOT net>
- Date: Sun, 9 May 2004 03:29:34 -0400
- Newsgroups: comp.sys.apple2
- References: <H8Vmc.25695$LA4.6898@edtnps84> <20040507224505.22258.00000886@mb-m01.aol.com> <Vbjnc.28326$LA4.3458@edtnps84>
- Xref: controlnews3.google.com comp.sys.apple2:427
"Wayne Stewart" <waynes@telus.dotnet> wrote in message
news:Vbjnc.28326$LA4.3458@edtnps84...
: Michael J. Mahon wrote:
:
: > In principle, one could print a suitable pattern on mylar or
on
: > a transparent film that could be applied to an aluminum
plate.
: > In practice, it might be difficult to get the horizontal and
vertical
: > rulings the right "color" and transparency to get smooth
tracking.
: >
: > Your best bet is to try to find one of the original plates,
or
: > one that is similar enough to work. ;-(
:
: I tried printing a few patterns onto transparency sheets with
an
: inkjet but it didn't work too well. I think maybe the black was
: too translucent.
: Finding the original plate might be more than difficult. I've a
few
: ideas on materials to try out so I'll see how that goes.
Try putting the translucent printout on a mirror.
Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy46pa @ comcast DOT net
Change DOT to a dot to contact me
---
This email ain't infected, dude!
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.678 / Virus Database: 440 - Release Date: 5/8/04