[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Transfering Disk Images from PC to Apple II
- Subject: Re: Transfering Disk Images from PC to Apple II
- From: "MechCD" <mechcd@bluebottle.com>
- Date: Sat, 1 May 2004 20:05:59 -0400
- Newsgroups: comp.sys.apple2
- References: <McUkc.9729$kh4.619253@attbi_s52> <arGdnZQ0rLOSjgndRVn-vg@comcast.com> <_1Vkc.7552$_41.397184@attbi_s02> <q9Vkc.45864$2v.35089@nwrdny02.gnilink.net> <O8Wkc.10258$kh4.650834@attbi_s52>
- Xref: controlnews3.google.com comp.sys.apple2:173
You run the source code onto the Apple through a serial link. You could do
that for just about any program, but it would take a while and wouldn't work
for some disks.
"Josiah" <com.yahoo@chibivash81> wrote in message
news:O8Wkc.10258$kh4.650834@attbi_s52...
> Another thing I don't quite understand about ADT, is how it says it must
be
> on both computers. Easy enough for the PC side, but what about the other
> end? How are you supposed to get it on the Apple II if you don't have a
way
> to write it to disk and it just sits there saying "Apple ][" and expecting
a
> disk to be inserted? Seems to almost defeat it's purpose. If you have a
way
> to write Apple II disks why would you need ADT? Yet... it seems you need
ADT
> on the apple to use it. Docs online don't seem to explain that at all.
They
> just tell you to put ADT on both computers and configure them and that's
it.
>
> Am I missing something here or what? *very confused*