Re: Apple II and PC - ADT - ADServer

[Jeff Thomas <a2forever@usa.net>]

Possible solutions:
Are both Super Serial Cards plugged into the same computer? It only
needs one
to operate properly, otherwise it could cause conflicts. Ensure the
'jumper block'
(contains triangle on its surface, located near the cable socket on the
actual card) is
facing upward to "modem", check the correct 'dip switches' are enabled
and the
card is installed in default slot #2. Let me know if need the proper dip
switch settings.

Also, disable the screensaver for either that single application or
entirely for WindowsXP and any background software (e.g. virus checkers,
etc) as it all may affect transfer performance, likely causing
corruption. Best bet is quitting Windows altogether and going into
native MS-DOS (not a Windowed-DOS-Shell/session).

Not sure about ADServer, as I had no experience with it.

I hope that helps!!!!!