[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple][ circuit board design
- Subject: Re: Apple][ circuit board design
- From: Wayne Stewart <waynes@telusdo.tnet>
- Date: Mon, 05 Apr 2004 14:27:50 GMT
- In-reply-to: <ZLccc.36249$RfJ.31655@twister01.bloor.is.net.cable.rogers.com>
- Newsgroups: comp.sys.apple2
- References: <4070D3E3.3010303@mindspring.com> <Ks6cc.11096$J56.10270@edtnps89> <ZLccc.36249$RfJ.31655@twister01.bloor.is.net.cable.rogers.com>
- User-agent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.4) Gecko/20030624 Netscape/7.1
- Xref: archiver1.google.com comp.sys.apple2:5028
Glenn Jones wrote:
Interesting to note that the spec below shows the bus connector at 2.95"w
when all of my cards are just over 2.5"
http://web.pdx.edu/~heiss/technotes/iigs/tn.iigs.028.html
They did a poor job of converting the original drawing to ascii art.
The printed version is very clear that 2.950" is from the front of
the connector to the rear of the card. They don't actually list
the connector length.
Wayne