Re: Apple II project

["John Van Winkle" <appleiieman@charter.net>]

I tried it this evening too.  It says it can't find the page.


John


"M. Pender" <mpender@hotmail.com> wrote in message
BC825E04.94A5%mpender@hotmail.com">news:BC825E04.94A5%mpender@hotmail.com...
> On 3/20/04 6:58 PM, in article TLGdnT22ZPg7RsHdRVn-ig@comcast.com, "Bill
> Garber" <willy46pa@comcast.net> wrote:
>
> >
> > "M. Pender" <mpender@hotmail.com> wrote in message
> > BC8240C3.9493%mpender@hotmail.com">news:BC8240C3.9493%mpender@hotmail.com...
> > : On 3/20/04 2:50 PM, in article
> > 18CdnY7AzvQdPMHdRVn-uw@comcast.com, "Bill
> > : Garber" <willy46pa@comcast.net> wrote:
> > : >
> > : > "M. Pender" <mpender@hotmail.com> wrote in message
> > : > BC82008F.92D1%mpender@hotmail.com">news:BC82008F.92D1%mpender@hotmail.com...
> > : > : A while back I posted the project report for a 12-bit A/D -
> > D/A
> > : > conversion
> > : > : card for the Apple II to the web.  The project report
> > includes
> > : > a user
> > : > : manual, wiring diagrams, specifications, and complete
> > source
> > : > code in
> > : > : Applesoft, HyperC and 65c02 assembler language.
> > : > :
> > : > : At the time I didn't have a permanent home for it.  I have
> > : > since made a home
> > : > : for it on a private web server:
> > : > :
> > : > :   http://nanochron.dynalias.org/mqp12-14-1990.pdf
> > : > :
> > : > : If nothing else, it provides a *very* detailed description
> > of
> > : > how to
> > : > : interface a device to the Apple II bus and write compatible
> > : > drivers.
> > : > : Enjoy,
> > : > : - Mike
> > : >
> > : > I might enjoy it, if I could get to it. 8o(
> > :
> > : Is there a problem with the web server?
> > : I just set up the server today, so its
> > : still in the 'experimental' category.
> > : - Mike
> >
> > I click on the link and it sits there searching
> > for a minute or 2 and then displays the "can't
> > find it" page.  8o)
>
> I can't really evaluate it myself from here--my router is 'smart' enough
to
> realize that one machine in my LAN is trying to access another machine in
my
> LAN, and it routes the connection internally, rather than going outside.
>
> As a consequence, everything looks fine from here, but that doesn't tell
me
> how things look from outside the lan.
>
> - Mike
>