[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Looking for Serial Card programming information (not SSC)

Subject: Re: Looking for Serial Card programming information (not SSC)
From: Chris Morse <chris@sorry.no.spam.com>
Date: Fri, 27 Feb 2004 23:43:13 -0500
Newsgroups: comp.sys.apple2
Organization: Posted via Supernews, http://www.supernews.com
References: <370265cd.0402271301.6241155e@posting.google.com>
Xref: archiver1.google.com comp.sys.apple2:3814

On 27 Feb 2004 13:01:51 -0800, aiiadict@hotmail.com (Rich J.) wrote:

>Hello,
>
>Trying to configure the Serial port of Oasis Apple II emulator.
>
>I'd like the basic commands to set BAUD RATE, stop bits, parity, flow
>control.
>
>I'd also like to know how to send data to PR#1 (slot 1, where the card
>is at) with a POKE, instead of PRINTing it to PR#1.
>
>Rich

Is that the same as the "Apple Communications Card"?  Not sure..
Sorry I can't be of much help; the only thing I could point to
is the ADT source code, which includes code for the Apple Comm Card.

// CHRIS

References:
- Looking for Serial Card programming information (not SSC)
  - From: aiiadict@hotmail.com (Rich J.)

Prev by Date: Re: Apple II Minus Question
Next by Date: Laser 128 Parallel Port
Previous by thread: Looking for Serial Card programming information (not SSC)
Next by thread: Re: Looking for Serial Card programming information (not SSC)
Index(es):
- Date
- Thread