Michael Maginnis <michaelmaginnis@yahoo.com> wrote:
Since I mentioned this in a previous post, it's eating at me and I have
to know. I have a FocusDrive mounted in my IIgs in Slot 6 (set to "Your
Card") and start up is set to that slot as well. I also have 2 3.5"
drives daisy chained into the Smart Port - if I want to add a 5.25"
drive to the end of chain, do I have to make any changes to the current
setup (other than plugging the drive in, obviously)? I seem to recall
reading somewhere that a IIgs will automatically try to boot from a
5.25" drive if it finds one attached.
I just rearranged my IIgs with the HD in slot 2 (set to your card), I
also have 2x3.5" ans 2x5.25" chained on the smartport. A lot of people
suggested different setups, but this one allows access to all disks plus
AppleTalk/printer and modem. The HD doesn't interfere with the modem at
all (at least with proterm)
-s