Re: Apple II ethernet

["Bill Garber" <willy46pa@comcast.net>]

"AndyX" <jmullett@aHiGofJ33fOzemail.com.au> wrote in message
news:FvDDb.281$Mq.9415@nnrp1.ozemail.com.au...
:
: > Best I ever did was nullmodem to my PC, run STerm
: > on the PC and telnet thru it. Works pretty well if
: > you don't mind working in all text and no better
: > than 9600 baud. ;-) 19,200 on IIgs.
: >
:
: I'm pretty sure, actually certain that the apple IIe can do
19,200 baud.
: I used that speed for all my ADT transfers back when I had it
up and

Ok, 19,200 works fine for direct connect file transfer
protocols, IE. ASCII, Xmodem, etc..., but once you add
the PC running STerm, and telnet to the outside somehow
the timing gets lost, and I've even had to back it off
to 2400 baud for a file transfer, which is really fun to
do "ONCE" (really slow) through this setup. Anyway, for
reading NGs and emails, it should work fine at any speed.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.544 / Virus Database: 338 - Release Date: 11/26/03