Re: new at this

["Bill Garber" <willy46pa@comcast.net>]

"Bender MX" <no@morespam.com> wrote in message
news:IYMAb.18775$d35.7441@edtnps84...
:
: "Bill Garber" <willy46pa@comcast.net> wrote in message
: MvOdnUXLjZ0FC06iRVn-tA@comcast.com">news:MvOdnUXLjZ0FC06iRVn-tA@comcast.com...
: > Here I am. I have ordered some more cables
: > and connectors to make more cables. I'll be
: > more than happy to make you one for $10 plus
: > Shipping which is $3 to the US, $5-$8 depending
: > on location outside the US. I am putting ADT
: > for Windows on my site. I have it now and it
: > should be there in an hour or so. I offer free
: > email or messenger (if you have one) support
: > if you need it.
:
:
: Hi Bill,
:
: Can you put me down for a Cable when you finish making them?
: I'll need to connect a SSC equipped IIe to a PC, thats the
correct cable,
: right?
:
: Later,
: Craig

You can actually use a straight thru cable with an SSC.
Simply point the jumper block on the card to "Modem" for
a nullmodem cable and "Terminal" for a straght thru cable.
If I have that wrong, just reverse it. One way is for one
cable and the other for the other. No special cable is needed.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.544 / Virus Database: 338 - Release Date: 11/25/03