[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AppleTalk on IIGS - Questions...
- Subject: Re: AppleTalk on IIGS - Questions...
- From: "M. Pender" <mpender@hotmail.com>
- Date: Fri, 28 Nov 2003 22:56:30 GMT
- Newsgroups: comp.sys.apple2
- References: <3F668819.1F66AAD@usa.net> <bkmtq1$8ke$1@acme.gcfn.org> <nzuwb.1277$f32.257@nwrddc02.gnilink.net> <3FC53E87.5AA5B067@lynx.bc.ca> <1Zrxb.2614$a54.359@nwrddc03.gnilink.net> <Xns94408B6F7B781menacechgoaolcom@206.141.192.32> <Ygzxb.2800$a54.1933@nwrddc03.gnilink.net> <Xns9440EE9E7BD91menacechgoaolcom@206.141.192.32>
- Xref: archiver1.google.com comp.sys.apple2:1088
Marsha <menacechgo@aol.com> wrote in message
news:Xns9440EE9E7BD91menacechgoaolcom@206.141.192.32...
>
> A GS can boot from AppleShare 2.0 and 3.0.x, boot support code was
> removed in later versions.
My IIgs has a Ramfast and a hard drive, so booting off the network has
limited appeal. My main goal is to store the contents of archives (Asimov,
etc.) on a hard disk or CDROM on a PC or a Mac and access those files from
the IIgs.
> re. switches, from http://apple2.org.za/gswv/a2zine/faqs/Csa2ACCEL.txt
> This first paragraph was for general use, not including booting as that
> relied on the ROM code as mentioned in the second paragraph.
I finally have my IIgs up and running Appletalk over ethernet on a
Mac/PC/Linux network.
I found out that my ZipGS was misconfigured and I had a bad Appletalk cable.
I was using a phone cord with Farallon connectors and the phone cord only
had two wires, not the usual four. That said, I never did figure out why I
was getting that "AppleTalk connection not found" error message. It just
seemed to go away.
Thanks to everyone who offered their advice--its sweet now that its working.
- Mike