Re: AppleTalk on IIGS - Questions...

["Bill Garber" <willy46pa@comcast.net>]

"Marsha" <menacechgo@aol.com> wrote in message
news:Xns94408B6F7B781menacechgoaolcom@206.141.192.32...
> [posted and mailed]
>
> "M. Pender" <mpender@hotmail.com> wrote in news:1Zrxb.2614$a54.359
> @nwrddc03.gnilink.net:
>
> > Maybe you can help me out then--when my IIgs boots I get a box that
> > says:
> > The selected AppleTalk connection could not be found.  Be sure it is
> > installed and that the slot settings in the control panel are correct.
>
> What ROM version of GS are you using?
> Did you install the 7th GS/OS 6.0.1 disk onto the server?

I never used disk 7, but I wasn booting either. ;-)

> My ROM 1 when booting without a serer available drops down to the next
> bootable slot.
>
> My ROM1
> Slot 1 Your Card   (My SCSI card)
> Slot 7 Appletalk
> Startup slot 7
> Appletalk dongle connected to Printer port on back of computer

ROM-3 you use printer port and set only slot 1
to AppleTalk, slot 7 remains set to YourCard.
Also should be using printer port on Mac.

> Booting from a Mac LCII OS 7.1 10MB running Appleshare 3.0.3
> (Using AppleShare Admin be sure to enable Apple II booting)

I used OS 8.1 on a PowerMac 7100 running AppleShare 2.0.1,
at least I think that was the version. I believe you do need
a higher version of Apple Share for booting though.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.544 / Virus Database: 338 - Release Date: 11/25/03