Re: An LCD for your IIGS?

[Jeff Blakeney <CUTjblakeney@syndicomm.com>]

On 20 Sep 2003 23:11:56 GMT, mjmahon@aol.com (Michael J. Mahon) wrote:

>Ed Eastman wrote:
>>
>>This has been done years ago, off the shelf.  I had an old projector 
>>with component input.  I used a VGA to component cable and an old mac 
>>multisynch to VGA plug.  It works rather well so long as it s not a 
>>newer projector that won't synch down to 15KHz.
>
>But the question about IIgs RGB to component video still stands.
>
>It should require nothing more than some analog matrixing
>and buffers, but I haven't seen it done.

Isn't that what Ed just posted about in the quote above?  It looks
like IIgs RGB to component video only requires hooking up a Mac RGB to
VGA adapter to the IIgs RGB out and hooking a VGA to component video
adapter between from that to the component input on your display.
Kind of like this:

  IIgs --> Mac to VGA adapter --> VGA to component adapter --> Display

At least, that is the impression I got from Ed's post.

-- 
 Jeff Blakeney - Dean of the Apple II University in the
                 Apple II Community on Syndicomm.com
 CUT the obvious from my address if you want to e-mail me