Re: Where is Ian Schmidt (or, can you help with my SoundMeister)?

[mjmahon@aol.com (Michael J. Mahon)]

Rodney Hester asked:

>"Michael J. Mahon" <mjmahon@aol.com> wrote in message
>20030520000629.02127.00000305@mb-m12.aol.com">news:20030520000629.02127.00000305@mb-m12.aol.com...
>> Rodney Hester wrote:
>>
>> >Just picked up a SoundMeister from eBay.  I'm delighted with the quality
>of
>> >the stereo output.
>> >
>> >However, I just can't seem to get anything to digitize through the mic
>port.
>> >Anything I record comes back as total silence.  Here's what I know:
>> >
>> >- The problem is slot-independent.  I've tried 1 and 4, with equal
>results,
>> >both set to Your Card.
>>
>> You mentioned trying different slots, but you didn't mention whether
>> the jumper cable from the card to the Ensoniq audio input was
>> connected.  It sounds like it isn't.
>
>It is, else I couldn't get stereo output.  =)  It appears two pins on the
>Ensoniq header (one hot, one ground) are used for digitizing, is that
>correct?

Yes.

-michael

Check out amazing quality 8-bit Apple sound on my
Home page:  http://members.aol.com/MJMahon/