Re: Apple //c+ questions...

[Roger Johnstone <rojaws@es.co.nz>]

In <b6cp91$lqd$01$1@news.t-online.com> Marcus wrote:
> David Empson schrieb in Nachricht
> <1fsrg57.16ncze11qsmkw0N%dempson@actrix.gen.nz>...
>>Jeff Thomas <a2forever@usa.net> wrote:
> 
>>Because of this, its built-in power supply probably only runs at 110V,
>>and it will only support NTSC video output, both of which would
>>complicate its use in other countries.
> 
> Is this realy NTSC ?
> I use a "US" Apple //c with a 220V-brick and a 9"-monitor (also 220V) 
> and it works!?
>
> Ok, for the Apple //c PLUS you need first a 220V to110V trafo.
> 
> So long 4 2day
> Marcus

If the monitor is a monochrome one it won't matter. The NTSC and PAL 
standards are basically the same except for the way they do colour. The 
only other difference is the field rate (PAL is 50 hertz, NTSC is 60Hz) 
but most monitors can easily cope with this variation.

-- 
Roger Johnstone, Invercargill, New Zealand

Apple II - FutureCop:LAPD - iMac Game Wizard
http://homepages.ihug.co.nz/~rojaws/
________________________________________________________________________
"Who the hell wants to hear actors talk?" - HM Warner, Warner Bros, 1927