Need help with RamFAST

[vector <abuse@aol.com>]

I just bought a Rev D RamFAST 3.01EZ, and I'm pretty excited about it.  
BUT, I can't connect a drive, because the card did not come with any 
cables.  I don't know what the pinout is for the 26-pin connector on the 
RamFAST, so I'm not ready to try building a cable.  I do have a 
motherboard printer cable that's a perfect physical fit - IDC-26 to DB-
25F, but I have no idea if that cable is wired properly for use with a 
RamFAST.  I'd like to know how I can fashion or obtain a replacement 
cable.  

Since I plan to towerize my IIgs, I'd rather find a way of getting that 
IDC-26 connector hooked up directly to a standard 50-pin IDC SCSI cable.  
Of course, the best option for me would be an Econ Pegasus cable: a 
three-headed cable with a DB-25 for external devices, a 50-pin IDC 
connector for internal devices, and the 26-pin IDC connector to the SCSI 
card.  I'd LOVE to have that.  I'd probably even pay to have one built, 
if I could find the cable specs.

Also, what enhancements are offered in a 3.01F revision, versus my 
3.01EZ?  Can I still obtain an upgrade?

Thank you everyone.