[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Trackstar can use IBM 360K floppy drives to R/W Apple disks?
- Subject: Re: Trackstar can use IBM 360K floppy drives to R/W Apple disks?
- From: "Bryan Villados" <news002@macgeek.org>
- Date: Sun, 10 Nov 2002 12:04:30 GMT
- Newsgroups: comp.sys.apple2
- Organization: RoadRunner - West
- References: <Fmkz9.12093$Dl.7443@nwrddc01.gnilink.net>
- Xref: archiver1.google.com comp.sys.apple2:24429
Hmmm... Unfortunately my Trackstar is sitting inside of an IBM PS/2 model
55sx with just a 3.5-inch disk drive. And the 3.5-inch disk drive doesn't
connect to the Trackstar card. I don't have any means of testing what you've
read. What I'm using right now is an Apple Unidisk 5.25 Drive that is
connected directly to the Trackstar card.
--- Bryan
"Frank Townsend" <ftownsen@iamdigex.net> wrote in message
news:Fmkz9.12093$Dl.7443@nwrddc01.gnilink.net...
> Looking at the Trackstar E manual, I read the following:
>
> "The Trackstar Disk Adapter Cable connects your Trackstar E to the 360k
> MS-DOS disk drive(s). Its presence allows the 360k drives to read and
write
> Apple floppy diskettes. This will in no way interfere with the operation
of
> the 360k dives(s) under MS-DOS."
>
> "Note: 1.2 Mb 5.25" disk drives cannot read Apple diskettes- even if they
> are capable of reading MS-DOS 360k software."
>
>
> Could some wise person explain this to me? I thought, obviously
> incorrectly, that MFM drives could not decode GCR encoded diskettes? But
> is this untrue for 360k drives? I'm confused.
>
>