Re: Null Modem driver for GBBS?

["Anthony G Beckett" <anthony@hello.unnamedpcmuseum.com>]

Terry;

Why doesn't the gateway program not see the AT command? When I drop DCD in
BBSLink, I still can read serial I/O. I basically trap when I am in OFFLINE
and ONLINE mode. When in Offline Mode, I respond to the appropriate AT
commands. And Online, I ignore them unless predicated by "+++".

Probably doesn't help much.

Anthony

"Terry & Utahna Olsen" <tolsen64@nospam.boycot.dns2go.com> wrote in message
news:foWe9.357815$me6.41504@sccrnsc01...
> Well, to tell the bbs to reset, I drop the DCD line, and the bbs resets.
> Then it sends modem commands and waits for a response...my problem is,
that
> when I drop the DCD line, the Gateway program never sees the AT command.
> Even if I immediately bring the DCD line back up, it's too late, GBBS has
> already sent the AT command and is listening for the reply, and i don't
want
> to just blindly send 0's to the BBS assuming that it received them...there
> could come a situation where it didn't see the 0 and continues to just sit
> there...I'd rather have the two talk back and forth.
>
> "Charles Claypoole" <Charles.Claypoole@p0.f114.n117.z1.fidonet.org> wrote
in
> message 000003a1@Bungholio.net">news:000003a1@Bungholio.net...
> >
> > T&UO> From: "Terry & Utahna Olsen" <tolsen64@nospam.boycot.dns2go.com>
> > T&UO>
> > T&UO> Is there a null modem driver for GBBS???  It would sure be a lot
> easier
> > T&UO> to get this thing to work "correctly" if I could get GBBS to stop
> > T&UO> sending modem commands and refusing to do anything else until it
> gets a
> > T&UO> reply.
> > T&UO>
> > T&UO>
> >
> > Hi Terry,
> >
> > Well, in BBSLink if you are using the null modem setup, when GBBS or
other
> BBS
> > sends a at command BBSLink will reply w/ "OK" or other hayes type
> response.
> > Maybe that will help  ?  I use the dialup setup , but it will do null
> modem
> > connects also.
> >
> > Charles
> > ~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.
> > ~ The Rainbow's End Internet Gateway
> > ! telnet://rainbowsendgs.dns2go.com
> > ~  User FidoNet address: 1:117/114
>
>