Re: MacADT to Apple IIc Cable Help!

["Cesar Soto G." <galaxy@vtr.net>]

Thanks Paul, but is possible build this cable directly
whitout DB-25 connectors or adapters, for a Power Mac,
Din5M / MDin8M?

Thanks again

Cesar


Paul Grammens wrote:

> "Cesar Soto G." <galaxy@vtr.net> wrote in message
> 3CF133AA.25C01455@vtr.net">news:3CF133AA.25C01455@vtr.net...
> >
> > Hi, I have Apple IIc, and I want connect to Mac with MacAdt
> > Software, to transfer disk images to 5 1/4 floppy disks from Mac
> > I found many instruction in Faqs for PC conecction whit Null-Modem Cable
> > but What cable can I use to do Apple IIc <---> MacADT transfers?
> > Can I Make this Cable?
> > How, pins diagrams?
> >
>
> I made one of those some years ago.  Here is what I've got on it:
>
> Handshaking Cable
>
> IIc DIN-5       Modem DB-25 Male
> 1-------------------4 RTS                      1
> 2-------------------2 TxD                      3
> 3-------------------7 Gnd                      4
> 4-------------------3 RxD                      5
> 5-------------------5 CTS                      2
>
> Without Handshaking
>
> IIc DIN-5       Modem DB-25 Male                 MiniDin IIc Plus
> 1-------------------20 DTR-------------------------1
> 2-------------------2 TxD   -------------------------3
> 3-------------------7 Gnd    ------------------------4
> 4-------------------3 RxD   -------------------------5
> 5-------------------6 DSR  or Pin 8, DCD. ---------2
>
> I'm pretty sure the info on the IIc Plus is good, because I figured it out
> myself and made a working cable.  I'm less sure of the IIc info. I remember
> it was a challenge. I wasn't too worried about getting a fast connection,
> since the files are small and I was just working with floppies anyway.
> -Paul

--
Reply-to : galaxy@netline.cl
Responder a : galaxy@netline.cl