[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
ZIPGS 2-pin Crystal
- Subject: ZIPGS 2-pin Crystal
- From: andrew.webber2@btinternet.com (Andrew Webber)
- Date: 30 May 2002 00:53:53 -0700
- Newsgroups: comp.sys.apple2
- Organization: http://groups.google.com/
- Xref: archiver1.google.com comp.sys.apple2:19961
Hi,
Quick question. I am trying to upgrade (Yes I have posted before ;-))
my ZIPGS and have read all the FAQs. The ZIPGS 8/16 I have is a 1.01
revision and has a soldered 2-pin crystal. There is a socket on the
card to accept a 4-pin TTL Oscillator, but this is currently empty. I
have also read the Hypercard stack.
Now my question, can I just snip (suggested in the Stack) the 2-pin
crystal off the board and then plug in a standard 4-pin oscillator?
Thanks
Andrew