Re: Power supply brick for Franklin ACE 500

[mjmahon@aol.com (Michael J. Mahon)]

Roy replied:

>Pin 1 GND Sense
>Pin 2 GND
>Pin 3 GND
>Pin 4 -12V
>Pin 5 +12V
>Pin 6 +5V
>Pin 7 (Center) +5 Sense
>
>Above from the 500's manual.
>
>
>Anything else you need?
>
>Roy
>
>Michael J. Mahon wrote:
>
>> I'd like to find one of these, it anyone has any leads.
>> 
>> Failing that, information on the pinout, voltages, and
>> currents would be very helpful.

Thanks very much, Roy.

If you have any info on the current requirements, that would be
helpful.  It looks like my next move is to build a power supply...

If I had to guess, it would be 3A for the +5 supply, 1A for the
+12, and about 0.1A for the -12.

-michael

 Email:  mjmahon@aol.com
 Home page:  http://members.aol.com/MJMahon/