Re: Transwarp + ramfast woes

[Wayne Stewart <waynes@intergate.ca>]

Mike Tulloch wrote:
> 
> Ok...I can't seem to find the usual sources of info and my bookmarks
> have been toast...but I can't get a Transwarp GS and a Ramfast to
> co-exist in the same ROM 03 GS...any ideas where I could find some
> resources or answers? It doesn't matter what slot I try the Ramfast
> in...it either hangs or dumps out into machine language. I can't boot
> off of a 3.5" either; it too dumps into machine language. It's a Ramfast
> F so there's no dip switches, and I've turned off everything in the
> Transwarp control panel...
> 
> Help!
> ~Mike

Check to see if your TW has a chip labeled TWGS-2A. The Ramfast manual 
says the TW won't work with a Ramfast if it has that chip. It'll be near 
the upper right hand side of the card.a.

You can try holding down the 0 when you turn on the IIGS. If the
utilities 
show up then under the options menu change the TransWarpGS setting to
yes. 
Maybe that'll help

Will the IIGS boot off a floppy if the ramfast isn't installed?

	Wayne