Re: GS/OS wont boot

["Charles & Jennifer Claypoole" <cajenn@sbcglobal.net>]

I cannot even get the scsi card to recognize the drive is even there..
Nothing has changed in the config of the card.. it worked for about 2 hrs
then started getting i/o errors, now nothing...   can a short in a scsi card
fry something in the drive?

"Mark Cummings" <NOTfigjams@primus.com.au> wrote in message
3ca30190_1@news.iprimus.com.au">news:3ca30190_1@news.iprimus.com.au...
> > I have a Apple //gs Rom 1, (had) a ramfast scsi, now Apple HS Scsi, 250M
> > scsi drive , internal 170 focus..  Was booting gsos without problems..
My
> > ramfast died today, so I put apple scsi in..  Now booting up into gsos
> > ALMOST finishes and crashes into monitor..  Version is 6.01..
> >   Anyone know
> > what I should do?   Reinstall?
>
> same hard drive not booting on two different SCSI cards. possibly it was
> corrupted when the RAMFAST crashed.
>
> you could try booting the system disk in the 6.0.1 set and see if your hdd
> is all there. then do some disk verifying. if no problems are found and it
> runs fine, I would reinstall 6.0.1 on top of your old system.
>
> > Or does rom1 work w/ 6.01 reliably?
>
> 6.0.1 works with both ROM1 & ROM3, not ROM0
>
> Mark
>
>
>