[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple I Schematic
- Subject: Re: Apple I Schematic
- From: "Paul R. Santa-Maria" <paulrsm@buckeye-express.com>
- Date: Mon, 01 Apr 2002 12:58:22 GMT
- Newsgroups: comp.sys.apple2
- Organization: Giganews.Com - Premium News Outsourcing
- References: <psSp8.150200$7b.14475649@bin7.nnrp.aus1.giganews.com>
- Xref: archiver1.google.com comp.sys.apple2:18559
Bryan Parkoff wrote:
> Is it possible that I am allowed to design and build my own printed
> circuit board from scratch by duplicating from the schematic. It is
> necessary to do because I will be able to understand how 8-bit
> microprocessor operate by manipulating the cells/currents throughout the
> electronic path. I can measure volt, amp, resistance, etc to determine the
> current before they can be shown on/off like binary.
You may wish to visit www.6502.org. There is a lot of information on
the
6502, including many 6502 single board computers you can build.
Paul R. Santa-Maria
Monroe, Michigan USA