[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: z80 boards

On Tuesday, May 14, 2013 1:29:42 PM UTC-5, Lisa2dotcom wrote:
> Chuck,
> 
> I built 2 cards and they both worked perfect with the CFFA3000.  My question is what "CP/M image" did you use?  FYI, MS SoftCard disks will not boot this type of card.
> 
> Rick

I tried booting an image that I thought was a copy of the boot disk that shipped with the original Applicard.  Since this is my first attempt to build a kit like this, I wouldn't be surprised if the problem was less than perfect soldering.