[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IIGS not recognising DOS 3.3 :(

Subject: Re: IIGS not recognising DOS 3.3 :(
From: "Mark Cummings" <NOTfigjams@primus.com.au>
Date: Thu, 07 Mar 2002 08:47:32 GMT
Newsgroups: comp.sys.apple2
Organization: iPrimus Customer - reports relating to abuse should be sent to abuse@iprimus.com.au
References: <3C8568B7.5ACD075D@usa.net> <1f8ng4q.1h1t5lk1vh1190N%dempson@actrix.gen.nz>
Xref: archiver1.google.com comp.sys.apple2:18018

> Exactly how do you have the drive connected to the IIgs?  Is it plugged
> into the built-in disk port?  If so, it must be connected _after_ any
> 3.5" drives which are also connected to the port.  You must also have
> slot 6 set to "Disk Port" in the control panel.

Also a faulty daisy chain board in the 3.5 drive can cause problems with any
5.25's plugged into it.
To test this you can try plugging the 5.25's straight into the smart port
and leave the 3.5 out of the picture. If it works, the problem is in the
daisychain board.

Mark

References:
- IIGS not recognising DOS 3.3 :(
  - From: Jeff Thomas <a2forever@usa.net>
- Re: IIGS not recognising DOS 3.3 :(
  - From: dempson@actrix.gen.nz (David Empson)

Prev by Date: Re: Vulcan HD Breakthru
Next by Date: Re: Vulcan HD Breakthru
Previous by thread: Re: IIGS not recognising DOS 3.3 :(
Next by thread: Re: IIGS not recognising DOS 3.3 :(
Index(es):
- Date
- Thread