[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SCSI booting problems - IIGS
- Subject: Re: SCSI booting problems - IIGS
- From: david@uow.edu.au (David Wilson)
- Date: 20 Dec 2001 14:40:27 +1000
- Newsgroups: comp.sys.apple2
- Organization: University of Wollongong
- References: <msc1983-1812012150120001@192.168.1.101> <3C203A5C.26454BF3@intergate.ca> <msc1983-1912011855570001@192.168.1.101>
- Xref: archiver1.google.com comp.sys.apple2:15814
msc1983@mac.com (Matthew Carpenter) writes:
>I pulled the drive from my PowerMac 6100 when I upgraded it's hard disk.
>The drive is a 350MB Quantum ProDrive LT
>I don't know what to set the jumpers to.
If there are any markings next to the jumpers it is fairly easy.
ID A0 A1 A2 (may be marked 1 2 4)
0 - - -
1 jumper - -
2 - jumper -
3 jumper jumper -
4 - - jumper
5 jumper - jumper
6 - jumper jumper
7 jumper jumper jumper
EP=Enable Parity
WS=Enable Spin Delay
SS=????
These jumper settings are from a Quantum ProDrive LPS 120/240.
Maxtor has bought Quantum's disk drive business so you can look at
http://www.maxtor.com/Maxtorhome.htm for more info.
--
David Wilson School of IT & CS, Uni of Wollongong, Australia